# Example loadfile for SCSI
# last value is sense or *
#
# timestamp TESTUNITREADY sense
0.000 TESTUNITREADY 0x00
#
#
# timestamp READ6 lba #xferlen sense
#    if lba is 0xffffffff this means to use a random lba
0.000 READ6    0 1 0x00
#
#
# timestamp READ10 lba #xferlen rd grp sense
#   if lba is 0xffffffff this means to use a random lba
#
#   rd is :
#     3 bits     0xe0 : RDPROTECT
#     1 bit      0x10 : DPO
#     1 bit      0x08 : FUA
#     1 bit      0x02 : FUA_NV
0.000 READ10    0 256 0 0 0x00
0.000 READ10 1000 256 0 0 0x00
0.000 READ10 2000 256 0 0 0x00
0.000 READ10 5000 256 0 0 0x00
#
#
# timestamp READCAPACITY10 lba pmi(0/1) sense
0.000 READCAPACITY10 0 0 0x00
#
#
# timestamp WRITE10 lba #xferlen FUAbits grp sense
# WRITES are ignored by default and must be activated using --allow-scsi-writes
#
#   if lba is 0xffffffff this means to use a random lba
#
#   FUAbits are cdb byte#1 in SBC:
#     a value of 0x06 will force the data to be written to the medium
#     a value of 0x00 allow the device to only write to nv-ram and not medium
0.000 WRITE10 5000 1 0x06 0 0x00